Milling Tools - CoCr - Titanium - Imes-Icore

T2/T7 - 2.0mm I 6.0 mm radius milling cutter
Ti/CoCr milling cutter for CORiTEC cobalt-chrome (CoCr) and titanium (Ti)
Diameter: 2 mm Shank: 6 mm

T1/T6 - 3.0 I 6.0 mm radius milling cutter long
Ti/CoCr milling cutter for CORiTEC cobalt-chrome (CoCr) and titanium (Ti)
Diameter: 3 mm Shank: 6 mm

T3/T8 - 1,5 mm I 6.0 mm radius milling cutter
Ti/CoCr milling cutter for CORiTEC cobalt-chrome (CoCr) and titanium (Ti)
Diameter: 1,5 mm Shank: 6 mm

T4/T9 - 1.0 I 6.0 mm radius milling cutter
Ti/CoCr milling cutter for CORiTEC cobalt-chrome (CoCr) and titanium (Ti)
Diameter: 1 mm Shank: 6 mm

T20 - 0,6 I 6.0 mm radius milling cutter
Ti/CoCr milling cutter for CORiTEC cobalt-chrome (CoCr) and titanium (Ti)
Diameter: 3 mm Shank: 6 mm

T19 - 0,5 I 6,0 mm end mill (l=4mm) universal milling cutter for CORiTEC Universal Radius: 0,5 mm Shank: 6 mm

T26 - 3.0 I 6.0 mm radius milling cutter long (l=20mm)
Ti/CoCr milling cutter for CORiTEC cobalt-chrome (CoCr) and titanium (Ti)
Diameter: 3 mm Shank: 6 mm

T26 - 2.0 I 6.0 mm radius milling cutter long (l=20mm)
Ti/CoCr milling cutter for CORiTEC cobalt-chrome (CoCr) and titanium (Ti)
Radius: 2 mm

Shank: 6 mm

T29 - 1,0 mm I 6.0 mm radius cutter (conical)

Material: Ti/CoCr

T80 - 2.5 I 6.0 mm drilling tool (l=22mm) Ti/CoCr
Special implant structures
Diameter: 2,5 mm
Shank: 6 mm

T81 - 1.5 I 6.0 mm drilling tool (l=18mm) Ti/CoCr special implant structures
Diameter: 1,5 mm
Shank: 6 mm

T5/T10 - 1,5mm I 6.0 mm Flat (conical)

Material: Ti/CoCr

T63 - 1.5 | 6.0 mm torus milling cutter (r=0.08mm, l=7mm, two flutes)
Ti/CoCr milling cutter for CORiTEC Ti/CoCr
radius: 1,5 mm
Shank: 6 mm

T64 - 1.5 | 6.0 mm torus milling cutter (r=0.08mm, l=15mm, two flutes) Ti/CoCr
Milling cutter for CORiTEC Ti/CoCr
radius: 1,5 mm
Shank: 6 mm

T68 - 1.5 I 6.0 mm end mill long (l=15mm, four-cutter)
Ti/CoCr milling cutter for CORiTEC Universal
Radius: 1.5 mm
Shank: 6 mm

T5/T10/17 - 1.5 | 6.0 mm end mill l=15mm
Universal
Radius: 1.5 mm
Shank: 3 mm

T2/T7 - 2.0 I 6.0 mm radius cutter, short (l=12mm)
Ti/CoCr cutter for CORiTEC cobalt-chromium (CoCr) and titanium (Ti)
Diameter: 2 mm shank : 6mm

T19 - 0,5 I 3,0 mm end mill (l=4mm) universal milling cutter for CORiTEC Universal Radius: 0,5 mm Shank: 3 mm