EV-Serie (DENTSPLY Implants / ASTRA TECH OsseoSpeed®* EV)
PreFace-Abutment D 11,5 Dentsply Implants/ASTRA TECH OsseSpeed® EV Implant System.
Blank diameter: 11,5mm
PreFace-Abutment D 16,0 Dentsply Implants/ASTRA TECH OsseSpeed® EV Implant System.
Blank diameter: 16mm
Pre-milled blanks from Dentsply Sirona that can be used in a fully outsourced workflow for the design and fabrication of CAD/CAM patient-specific abutments.
• For EV implant connections.
• The blanks are supplied with matching abutment screw.
Pre-milled blanks from Dentsply Sirona that can be used in a fully outsourced workflow for the design and fabrication of CAD/CAM patient-specific abutments.
• For EV implant connections.
• The blanks are supplied with matching abutment screw.
Pre-milled blanks from Dentsply Sirona that can be used in a fully outsourced workflow for the design and fabrication of CAD/CAM patient-specific abutments.
• For EV implant connections.
• The blanks are supplied with matching abutment screw.
Pre-milled blanks from Dentsply Sirona that can be used in a fully outsourced workflow for the design and fabrication of CAD/CAM patient-specific abutments.
• For EV implant connections.
• The blanks are supplied with matching abutment screw.
Pre-milled blanks from Dentsply Sirona that can be used in a fully outsourced workflow for the design and fabrication of CAD/CAM patient-specific abutments.
• For EV implant connections.
• The blanks are supplied with matching abutment screw.
Pre-milled blanks from Dentsply Sirona that can be used in a fully outsourced workflow for the design and fabrication of CAD/CAM patient-specific abutments.
• For EV implant connections.
• The blanks are supplied with matching abutment screw.
Pre-milled blanks from Dentsply Sirona that can be used in a fully outsourced workflow for the design and fabrication of CAD/CAM patient-specific abutments.
• For EV implant connections.
• The blanks are supplied with matching abutment screw.
Pre-milled blanks from Dentsply Sirona that can be used in a fully outsourced workflow for the design and fabrication of CAD/CAM patient-specific abutments.
• For EV implant connections.
• The blanks are supplied with matching abutment screw.
Pre-milled blanks from Dentsply Sirona that can be used in a fully outsourced workflow for the design and fabrication of CAD/CAM patient-specific abutments.
• For EV implant connections.
• The blanks are supplied with matching abutment screw.
AAS-Serie for the Dentsply Astra EV / Astra Tech® implant system.
DEV-Serie for the DENTSPLY / Astra EV implant system.
Deutsch